
By job
RUITOOL Shelf & Drawer Jigs
Jigs for the inside of the cabinet: shelf pin holes in straight columns and drawer slides at matching heights.


7 holes, 2-in-1
RUITOOL 7-Hole Shelf Pin Jig with Hinge Guide
1/4 in and 5 mm · 35 mm hinge guide
$39.99

Pair, with toggle clamps
RUITOOL Drawer Slide Jig with Magnetic Support Arms
Holds slides up to 24 in · Inch and metric scales
$41.43

5/64 to 7/16 in bits
RUITOOL Drill Bit Stop Collar Set, 2 Pieces
Bits 5/64 to 7/16 in · Aluminum, nylon ring
$19.99
- Bench noteShelf Pin Holes: 1/4 Inch or 5 mm, and Where to Drill
Two sizes that look the sameSpacing and edge distanceDrill to one depthRead the note - The rangeAll 29 RUITOOL toolsThe rest of the RUITOOL range, by bench.Cabinet Jigs6 · from $29.59Hand Saws6 · from $14.19Marking Knives & Edge Tools6 · from $20.99Saw Guides & Drill Jigs5 · from $19.99Woodturning Tools2 · from $47.99Shop all tools
What the job needs
Shelf & Drawer Jigs: three things to check
- Holes at one spacing and one depth, so shelves sit flat.
- The pin size your hardware uses: 1/4 in or 5 mm.
- A way to hold a drawer slide level while you screw it in.
| Tool | Version | Made for | From |
|---|---|---|---|
| RUITOOL 11-Hole Shelf Pin Jig | 11 holes | "Shelf Pin Jig" | $46.79 |
| RUITOOL 7-Hole Shelf Pin & Hinge Jig | 7 holes, 2-in-1 | "Shelf Pin Jig" | $39.99 |
| RUITOOL Drawer Slide Jig | Pair, with toggle clamps | "Drawer Slide Jig" | $41.43 |
| RUITOOL Drill Stop Collars | 5/64 to 7/16 in bits | "furniture installation" | $19.99 |
More jobs