
Classic or long neck
RUITOOL Woodworking Marking Knife, Double Bevel
Double bevel · High-carbon steel
from$20.99
Marking Knives & Edge Tools · 3 mm 65Mn blade
Spokeshave
A spokeshave with a flat sole for edges and outside curves. It trims and smooths furniture parts and tool handles, and it will not follow a hollow.
Checkout, payment and delivery happen with our retail partner. How we update prices
What it does
The sole sits flat on the work, so it runs true along an edge or over an outside curve.
Hardened manganese steel, rated HRC 56 to 64, thick enough to stay steady in the cut.
Side screws set the depth and level the edge. A center knob locks it.
Some shaping is too fine for a plane and too long for a chisel. A spokeshave fills that gap. Hold it by the two beech handles, set a light cut, and work with the grain along a chair rail or a tool handle. The flat sole rides the surface and takes off a thin, even shaving. Test the setting on scrap before you touch the real piece.
Limits
The sole is flat, so it cannot reach inside a hollow curve. For round rods and spindles our concave spokeshave is the better tool. For a straight chamfer the chamfer plane is quicker. The blade comes sharp, so handle it with care when you set it.
Same bench
6 tools, from $20.99. Set them side by side in one table.
All 6 RUITOOL Marking Knives & Edge ToolsFrom the same bench
Tools that share a bench or a job with the Flat Spokeshave.

Classic or long neck
Double bevel · High-carbon steel
from$20.99

R1.5 and R2 grooves
Veneer, PVC, ABS · R1.5 and R2 chamfer
$32.99

Questions
Edges, flat faces and outside curves, such as furniture parts and tool handles.
Leave the center knob slightly loose, level the blade with the two side screws, then lock the knob and test on scrap.
The concave one. Its hollow sole wraps around the rod, and this flat one does not.
The RUITOOL range
Knives that strike a layout line, and hand tools that shape and trim an edge. 6 tools, from $20.99.
$39.99Spokeshave
Add It to Your Bench on Amazon