7 holes, 2-in-1
RUITOOL 7-Hole Shelf Pin Jig with Hinge Guide
1/4 in and 5 mm · 35 mm hinge guide
$42.49
Cabinet Jigs · Face frame and frameless
RUITOOL 3-in-1 Cabinet Door Mounting Jig
$36.47
Red and gray
A third hand for hanging cabinet doors alone. It clamps to the cabinet, carries the door at the height you set, and works on face-frame and frameless boxes.
- Cabinet type
- Face frame and frameless
- Clamping range
- 3/8 to 2-3/4 in (9 to 71 mm)
- Height adjustment
- 93 mm in all: 63 mm up, 30 mm down
- Body
- Aluminum alloy, rubber pads
Fits
- Face-frame cabinets, with clearance for decorative molding
- Frameless cabinets
- Base and wall cabinet doors, plus push-to-open latch drilling
Not for
- Frames thicker than 2-3/4 in
Checkout, payment and delivery happen with our retail partner. Price from our update of 1 October 2026. How we update prices
What it does
The 3-in-1 Door Mounting Jig, in three points
Holds the door for you
The base carries the door's weight while you drive the hinge screws. One person can hang a kitchen.
Clears a face frame
The clamp opens from 3/8 to 2-3/4 in, so it steps over molding on framed cabinets and still grips a frameless side.
Fine height control
A threaded post moves the door 63 mm up or 30 mm down. Set the reveal once and repeat it door after door.
Specifications
- Cabinet type
- Face frame and frameless
- Clamping range
- 3/8 to 2-3/4 in (9 to 71 mm)
- Height adjustment
- 93 mm in all: 63 mm up, 30 mm down
- Body
- Aluminum alloy, rubber pads
- In the box
- Jig, Phillips #2 bits, storage bag
- Weight
- 1.52 lb
At the bench
Hanging a door means holding it level, holding the gap and driving screws, all at once. This jig takes the first two jobs. You clamp it under the opening, rest the door on its shelf and turn the post until the reveal matches the door beside it. Rubber pads keep the aluminum from marking paint. The same tool guides the drill for push-to-open latches on base and wall cabinets.
Check before you buy
- The cabinet edge you clamp to is between 3/8 and 2-3/4 in thick.
- You need up to 63 mm of lift or 30 mm of drop to reach your reveal.
- You want latch drilling as well as door support.
Limits
Pick another one if
If every cabinet you own is frameless, our frameless jig costs less and is smaller in the hand. This one earns its place when a kitchen mixes both kinds or when face frames carry molding. It will not grip a frame thicker than 2-3/4 in. It also sets height only, so the side gap is still yours to check with a shim or a rule.
Same bench
RUITOOL Cabinet Jigs
7 tools, from $9.99. Set them side by side in one table.
All 7 RUITOOL Cabinet JigsFrom the same bench
More RUITOOL tools
Tools that share a bench or a job with the 3-in-1 Door Mounting Jig.
Frameless only
RUITOOL Cabinet Door Mounting Jig for Frameless Cabinets
Frameless only · Clamps 7 to 40 mm
from$29.59
From buyers
What buyers say about the 3-in-1 Door Mounting Jig
4.6 out of 5 from 82 ratings. Reviews word for word, with the critical ones left in.
Love it
Well thought out jig and solidly built. Definitely a time saver not to have to measure the placement for each door. The integrated centering bushings for the push to open is a great feature. No need to buy a separate jig.
Makes cabinet replacing so much easier
Using this as I replace custom cabinets and it has been a lifesaver! It's very simple to set up and doesn't require technical experience to use.
Questions
3-in-1 Door Mounting Jig: answers
Does it work on face-frame cabinets?
Yes. It is made for both face-frame and frameless cabinets and clamps onto edges from 3/8 to 2-3/4 in thick.
What is in the box?
The jig, Phillips #2 bits and a storage bag.
Can one person hang a door with it?
That is its purpose. The jig carries the door at a set height, which leaves both hands free for the hinges.
The RUITOOL range
RUITOOL Cabinet Jigs in one place
Jigs for hanging doors, drilling hinge cups, spacing shelf pins and setting drawer slides. 7 tools, from $9.99.