5/64 to 7/16 in bits
RUITOOL Drill Bit Stop Collar Set, 2 Pieces
Bits 5/64 to 7/16 in · Aluminum, nylon ring
$19.99
Saw Guides & Drill Jigs · 6 preset angles
RUITOOL Adjustable Track Saw Square with 6 Angle Stops
$37.99
Square with mounting plate
A track saw square with an index pin and six preset angles. It sets the rail for square cuts and common miters in either direction.
- Preset angles
- 90, 60, 45, 30, 22.5 and 15 degrees, either direction
- Lock
- T-slot block and cam-lock clamp
- Supports
- Two pads that rest on the board
- In the box
- Square and wall-mount plate
Fits
- Festool and Makita guide rails
Not for
- Rails with a different T-slot
Checkout, payment and delivery happen with our retail partner. Price from our update of 1 October 2026. How we update prices
What it does
The Adjustable Track Saw Square, in three points
Six stops, both ways
90, 60, 45, 30, 22.5 and 15 degrees. Pull the pin, turn, and lock.
T-slot block and cam lock
Two fixings hold the square to the rail so it moves with it.
Pads on the board
Two support pads keep the rail from lifting at the edge.
Specifications
- Preset angles
- 90, 60, 45, 30, 22.5 and 15 degrees, either direction
- Lock
- T-slot block and cam-lock clamp
- Supports
- Two pads that rest on the board
- In the box
- Square and wall-mount plate
At the bench
Angled cuts on a track saw usually start with a protractor and a clamp. Here you pull the index pin, rotate to the stop and tighten the knob. The rail is at 45 degrees, or 22.5, before you have found a pencil. Go back to 90 with one more turn. A wall-mount plate keeps the square off the bench when you are done.
Check before you buy
- Your guide rail is Festool or Makita.
- The angles you cut are among the six presets.
- You will test the first cut against a known square.
Limits
Pick another one if
Buyers rate it 3.8 out of 5, below our fixed 90 degree square. If you only ever cut square, the fixed one has fewer parts to check. The stops are preset. An angle between them has to be set by other means. It is made for Festool and Makita rails.
Same bench
RUITOOL Saw Guides & Drill Jigs
5 tools, from $19.99. Set them side by side in one table.
All 5 RUITOOL Saw Guides & Drill JigsFrom the same bench
More RUITOOL tools
Tools that share a bench or a job with the Adjustable Track Saw Square.
Fixed 90 degree
RUITOOL Track Saw Square, 90 Degree, Quick Lock
Fixed 90 degree · Festool and Makita rails
$38.35
Bases up to 13-3/8 in
RUITOOL Adjustable Circular Saw Guide Rail
Bases up to 13-3/8 in · Press-down clamp
$22.39
From buyers
What buyers say about the Adjustable Track Saw Square
3.8 out of 5 from 24 ratings. Reviews word for word, with the critical ones left in.
Easy fit and accurate
This is a well-made, solid add-on for a track saw. It easily connects to the track and has accurate detents for the most commonly used angles. It's definitely worth the price, especially considering the time it saves on repeated cuts, just pick it up and go to the next cut. The preset angles make adjustments quick and accurate, so you can consistently achieve the same angle without having to worry about alignment or guesswork. You forgot to make a cut, set the angle on the detent and go, its the same every time.
Nice for what it is
This track saw square is decent for what it's designed to do. There is a tiny bit of play in the mechanism, so I wouldn't rely on it for ultra-precise finish cuts. However, for rough cuts and repeatable angles, it works very well. The positive stops are convenient, the cam lock holds securely, and the repeatability is consistent, which is really what I wanted it for. Overall, it's well made and a good value if you understand its limitations.
Does not adjust to 90 degrees.
Looks and works well, but does not make square cuts, the cut is 1/8" off at 24". There is no adjustment anywhere on this thing that I could find. An adjustable zero position would make this perfect.
Fit on track and adjusts to angles
Looks good. It looks like it will work. Haven't tried it on a project yet.
Questions
Adjustable Track Saw Square: answers
Which angles are preset?
90, 60, 45, 30, 22.5 and 15 degrees, in either direction.
How does it attach to the rail?
An adjustable T-slot block and a cam-lock clamp secure it.
Does it work on any rail?
It is compatible with Festool and Makita track saw guide rails.
The RUITOOL range
RUITOOL Saw Guides & Drill Jigs in one place
Squares and fences that keep a power saw on line, and jigs that keep a drill or a tap at the right depth and angle. 5 tools, from $19.99.