
Hand Saws · Saw plus knife
RUITOOL 6 Inch Ryoba Saw and Marking Knife Bundle
Saw and knife
A small double-edge pull saw and a double bevel marking knife in one box. Mark the line, then cut to it.
- Saw blade
- 6 in SK5 high-carbon steel, 0.67 mm
- Saw teeth
- 14 and 17 TPI
- Saw hardness
- HRC 60 to 63
- Knife
- High-carbon steel, double bevel, HRC 58 minimum
Fits
- Flush and finish cuts
- Marking lines, whittling and carving
Not for
- Long or deep cuts in thick stock
Checkout, payment and delivery happen with our retail partner. How we update prices
What it does
The Saw and Knife Bundle, in three points
Two sets of teeth
One edge has 14 TPI for ripping with the grain, the other 17 TPI for crosscuts.
Thin SK5 blade
The 0.67 mm blade flexes for flush cuts, and the teeth are hardened to HRC 60 to 63.
Knife for both hands
Both faces are beveled, so it cuts a line left-handed or right-handed. A sheath comes with it.
Specifications
- Saw blade
- 6 in SK5 high-carbon steel, 0.67 mm
- Saw teeth
- 14 and 17 TPI
- Saw hardness
- HRC 60 to 63
- Knife
- High-carbon steel, double bevel, HRC 58 minimum
- Knife length
- 7.6 in
- In the box
- One saw, one knife with sheath
At the bench
Clean joinery starts with a knife line and a saw that follows it. This box holds both. Score the line with the knife, set the saw in the groove and pull. The saw cuts on the pull stroke, so the thin blade stays straight, and it bends enough to trim a dowel flush with the surface.
Check before you buy
- You cut small parts more than long boards.
- You want a knife line rather than a pencil line.
- You will keep the knife dry between jobs.
Limits
Pick another one if
The saw is 6 inches, which suits dowels, small tenons and trim. It is too short for deep cuts or thick stock, and our 10 inch ryoba handles those. The knife is high-carbon steel, so wipe it dry after use or it will mark. If you only need one of the two, both are sold on their own.
Same bench
RUITOOL Hand Saws
6 tools, from $14.19. Set them side by side in one table.
All 6 RUITOOL Hand SawsFrom the same bench
More RUITOOL tools
Tools that share a bench or a job with the Saw and Knife Bundle.



Classic or long neck
RUITOOL Woodworking Marking Knife, Double Bevel
Double bevel · High-carbon steel
from$20.99
Questions
Saw and Knife Bundle: answers
What comes in the box?
One 6 inch double-edge pull saw and one marking knife with a protective sheath.
Is the knife for right or left hands?
Either. It has a double bevel, so it cuts in both directions.
Which edge cuts which way?
The 14 TPI edge cuts with the grain and the 17 TPI edge cuts across it.
The RUITOOL range
RUITOOL Hand Saws in one place
Double-edge pull saws for joinery and boards, plus two saws for rougher jobs. 6 saws, from $14.19.